 Smooth ceramic (high quality ceramic)is made of hot press injection technic, size is very accurately. We can produce and install according to customers demand size , joints have material as nickel-plate copper or coper, stainless steel screw, surface as zinc plating or nickel-plate treatment etc, it can endure high temperature as 425 C degree, Voltage 250V-450V, Current 10A-30A . Our products are made not-standard with high quality , it can be customerized by your request .
 
  

  	 			Performance 		
 			Item 			Index 			Unit 			Steatite ceramic 			95 Al2O3 			96 Al2O3 		
 			Physical Characteristics 			Bulk density 			g/cm3 			2.7 			3.6 			3.6 		
 			Water absorption 			% 			0 			0 			0 		
 			
 			Mechanical Characteristics 			Flexural strength 			Mpa 			145 			320 			340 		
 			Hardness Vickers 			Gpa 			5.7 			12.2 			13.5 		
 			Elastic modulus 			Gpa 			120 			280 			320 		
 			Poisson’s ratio 			- 			0.21 			0.22 			0.23 		
 			Thermal Characteristics 			Linear expansion coefficient 			20-5000C 10-6/0C 			7.9 			7.1 			7.2 		
 			Thermal conductivity 			w/(m.k) 			2.5 			16 			24 		
 			Specific Heat 			*10-3J/(kg*K) 			0.75 			0.78 			0.78 		
 			Electrical Characteristics 			Dielectric constant(1MHZ) 			- 			6.2 			9 			9.4 		
 			Dielectric loss angle 			*10-4 			18 			15 			5 		
 			Dielectric strength 			*106V/m 			18 			12 			15
 			  		
  

 Application:
 
 Electric Ceramic Connector is widely used in high temperature enviroment, kinds of connection terminal space of severe demand.

Steatite Ceramic Terminal Block For Flexible Heater

Steatite Ceramic Terminal Block For Flexible Heater

Coil Heaters

Thermocouple RTD

Mineral Insulated Thermocouple Cable

Thermocouple Compensating Cable

Cartridge Heaters

Cast Heater

Tubular Heater

High Temperature Cable

Thermocouple Connection Head

Hot Runner Temperature Controller

Thermocouple Thermowell

Sacrificial Anodes

Thermocouple Components

Mica Insulated Band Heaters

Ceramic Heaters

Electric Heater Components

Heater Making Machine

Steatite Ceramic Terminal Block For Flexible Heater

thermal gap filler

thermocouple ceramic terminal blocks

thermocouple ceramic terminal block

Performance
Item	Index	Unit	Steatite ceramic	95 Al2O3	96 Al2O3
Physical Characteristics	Bulk density	g/cm3	2.7	3.6	3.6
Physical Characteristics	Water absorption	%	0	0	0
Mechanical Characteristics	Flexural strength	Mpa	145	320	340
	Hardness Vickers	Gpa	5.7	12.2	13.5
	Elastic modulus	Gpa	120	280	320
	Poisson’s ratio	-	0.21	0.22	0.23
Thermal Characteristics	Linear expansion coefficient	20-5000C 10-6/0C	7.9	7.1	7.2
	Thermal conductivity	w/(m.k)	2.5	16	24
	Specific Heat	10-3J/(kgK)	0.75	0.78	0.78
Electrical Characteristics	Dielectric constant(1MHZ)	-	6.2	9	9.4
	Dielectric loss angle	*10-4	18	15	5
	Dielectric strength	*106V/m	18	12	15