Wuhan Global Metal Engineering Co., Ltd
Wuhan Global Metal Engineering Co., Ltd The pioneer manufacturer of heaters & sensors
Add to Cart
High Accuracy Temperature Controller for Injection Molding Systems
1. Description
Touch screen Temperature Controller for Plastic Injection Machine Hot runner System offer customized number of control zones and form factors.
This controller is ideal for regular molding machines without sequential fill capability. It allows operators to program the controller according their specific molding needs. Each control zone can be programmed for time-based and/or volume-based injection. The nozzles for each control zone can be graphically shown on the touch screen display.
The time from injection start to packing end (injection plus packing time) is entered into the Close Timer to switch all valves. Individual close times are also available.
2. Applications
This kind of controller could auto induct to any heating models and greatly improve the work capacity
Inner and outer ring to dynamic tracking the ambient temperature effectively prevent the influence of ambient temperature during measurement.
Cold compensation with thermostat of outer ring makes the control measure more precision through removing the ambient influence dynamically
Controller can easy detect to T/C reversed or T/C Open, and will be operated according to error information and control mode when detected the problems.
Temperature Deviation Alarms
Non-touch transfer
Heater current monitor
Soft start function
Manual output mode
Overall error indicator, easy to find error reason
Output module rating 15A per Point
3. Specifications
| Ambient temperature : | 32°F to 131°F(0°C to 55°C) |
| Relative humidity : | 10%-95% |
| Delivery temperature: | -40°F to 158°F(-40°C to 70°C) |
| Power supply | AC185V-245V,50/60HZ |
| T/C type: | J/K |
| Temperature Unit: | °C/°F |
| Temperature control scope: | 45°C to 550°C |
| Temperature test precision | +3% |
| Repeat temperature measure precision : | +0.1% |
| Repeat temperature measure precision : | +0.5% |
| T/C cooling compensation: | Dynamic tracking |
| Noise restrain: | common mode rejection ratio>100DB, |
| Sample frequency | 10HZ(100mS) |
| One point load: | 15A |
| F1,F2,F3,F4: | 250V-15A(special fuse) |